CYCLONE-V2-MOTORBIKE-MOTORCYCLE-ALARM-IMMOBILISER Fitted M50

Thats not bad an hour to fit an alarm and what a great price

Dave it was a breeze,when you sit down and get every thing ready and study the wiring diagram to see were everything is going to go there are only 7 wires to either scotch clip or solder(which I done) feel safer.The price was great I have paid well more than that over the years for crap,this one has some nice features to it.I thank Tim for posting the link excellant.

i've had one of these kicking around the garage for about a year, did'nt fit it because it looked scary , but may have a crack at it .

Hi Lez if you need any help give us a shout.I have the diagram for the cyclone v2 and looked up your wiring diagram for the c800.

That's one heck of a cheap alarm and the peace of mind it'll give is priceless

cheers alfie92 will let you know when i get a bit of free time

alfie92 just a couple of questions will it lower the cost of insureance haveing one of these fitted and do F u bennits class this as a mod lloooll looked at the link they seem like a good bit of kit did u get the one with remote start and if so can you still start bike with key if you want (could be stupid question)

First of all most insurance comp will say it not approved(to cheap)

Bennetts would most likely say it was a mod.

Yes the remote start is just a small blue wire that goes to the small red wire on the cyclone unit.Personally I did not wire it up for I would rather use the clutch when starting incase of false neutral.

Sound Lez there are only 3 wires that are not under the seat and these go to the ignition fuse, pink and brown join together onto the live side of the fuse (orange) and the grey goes to dead side (orange with yellow tracer)The long blue from the cyclone goes to the black with white tracer on the start relay next to tank.The remaining two yellow wires go to your indicators just follow the wire back from the plug that goes into your rear fender and you will find a light green and a black wire put a yellow to each of these.Connect your power to the battery and the earth leads and you are done.This wiring is for the Cyclone v2 that I bought for my 07 m50/m800 with your wiring colours.I can't guarantee this but hope it helps.

sounds straight forward enough, will have a crack so will be in touch alfie92