Suzuki 800 Intruder Club & Forum A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder |
| | Max height | |
| | Author | Message |
---|
Dj_Star Member
| Subject: Max height Tue May 23, 2017 12:23 pm | |
| Hey folks, What's the max height u can get away with without worrying about cable extensions? If found a cool set of bars with the measurements 560mm wide, Rise is 210mm Bar Diameter 27mm approx. Would this be to much?
Cheers Dj | |
| | | Bluesman Very Valued VIP Member
| Subject: Re: Max height Tue May 23, 2017 12:50 pm | |
| Bikes vary - release bars with 4 bolts and see how much you have. About 10" I would guess. | |
| | | Dj_Star Member
| Subject: Re: Max height Tue May 23, 2017 1:18 pm | |
| | |
| | | KeithW Member
| Subject: Re: Max height Tue May 23, 2017 4:36 pm | |
| II've put Aeromach risers on mine and they raise the standard bars 40mm and pull back 45mm. I've had to remove the cable guide but the clutch and brake cables are ok and I've had to move the throttle cables to the inside of the yoke. Any more up or back and I would have needed new cables all round.
KeithW | |
| | | Dj_Star Member
| Subject: Re: Max height Tue May 23, 2017 5:21 pm | |
| - KeithW wrote:
- II've put Aeromach risers on mine and they raise the standard bars 40mm and pull back 45mm. I've had to remove the cable guide but the clutch and brake cables are ok and I've had to move the throttle cables to the inside of the yoke. Any more up or back and I would have needed new cables all round.
KeithW 40mm??? That it?? Bugger. Really liked the look of these... But good to know especially when u have the same bike. | |
| | | katsd Very Valued VIP Member
| Subject: Re: Max height Tue May 23, 2017 9:32 pm | |
| I went with flat drags - 34" wide, 6.5" pullback. Sat them on 3" risers - standard cables fitted fine. Handles much better as well " /> | |
| | | Dj_Star Member
| Subject: Re: Max height Tue May 23, 2017 10:24 pm | |
| Cheers Dave. I'm thinking of getting the bars and just seeing. If they don't fit I will just have to re-home them.
Ps. That's a sweet ride! | |
| | | Bluesman Very Valued VIP Member
| Subject: Re: Max height Tue May 23, 2017 11:29 pm | |
| Other tricks include re routing clutch cable and easing the electrics out of the hole in headlamp. Going the other side of the yoke has already been mentioned. These avoid having to cut wires or buy new cables. Where there is a will there is often a way. Best of luck! | |
| | | Sponsored content
| Subject: Re: Max height | |
| |
| | | | Max height | |
|
Similar topics | |
|
| Permissions in this forum: | You cannot reply to topics in this forum
| |
| |
| |
Slide Show | A random selection of suzuki800.com member bikes. |
Latest topics | » Hello All, by Badger Thu May 16, 2024 10:56 pm
» G’day by Badger Thu May 16, 2024 2:37 pm
» Hi all by Badger Thu May 16, 2024 2:33 pm
» just saying hello to this site by sgtruth60@gmail.com Tue May 07, 2024 8:04 pm
» Newbie by M800chimp Tue May 07, 2024 11:28 am
» 12inch apes by Mbroom21 Tue Apr 16, 2024 12:54 pm
» Aye what's happenin'? by 717RedRumBob Fri Apr 12, 2024 6:50 am
» Handle bars rotation for comfort by Badger Thu Apr 11, 2024 1:20 pm
» Hello! by GregWidger Mon Apr 01, 2024 9:16 pm
» Hey to all by alongfortheride Tue Mar 26, 2024 9:41 pm
» Just saying hello as asked... plus a question. by SAM11206 Wed Mar 20, 2024 6:34 pm
» Hello! by Onigatudor Wed Mar 20, 2024 2:39 pm
» Choke plunger by flying1 Wed Mar 13, 2024 4:43 pm
» Hello intruder people by nano Tue Mar 05, 2024 2:19 pm
» Hi from North east England by Brianhuck Sat Mar 02, 2024 7:30 pm
» VX800 - Wiring issue colours & diagram? by Billybop90 Fri Mar 01, 2024 12:44 am
» Looking for a set of Leg wind deflectors for a C50 Boulivard. by Aikido789 Sat Feb 24, 2024 10:11 am
» Saying hello from Cheshire by bernard chaddock Wed Feb 21, 2024 4:58 pm
» ola de portugal by fabio almeida Tue Feb 20, 2024 9:28 am
» Hello from Texas by icoolwecool99@gmail.com Mon Feb 19, 2024 9:47 pm
|
|