Battery Removal M800 (2010)

I'm looking to remove the battery for charging while the machine is not in use. I can only find removal instruction for earlier models. The battery is located under the seat. I do see a plate which is attached by two bolts which seems to be securing the battery. I don't want to start taking things apart until I find out the proper way to remove the battery.
Any help would be much appreciated.

Thanks

Perhaps this will help:



After removing it from the terminal, don't let the (+) connector touch any metal part on the bike, ok?


Step One: Remove the (-) negative cable and after the (+).
Step Two: When you want to install it, do the inverse way: first the (+) and after the (-).

good to remember negative first and last

I forgot to say:
I've a Oxford Oximiser like this one:



that came with two different connectors as displayed in pic:
The ones on the top will be fit always on the bike directly to (+) and (-) battery. This method avoid to remove the battery from the bike. When it is not in use, i simply connect them directly to recharge&maintenance and stays as long as i want. No damage and it starts always at the first attempt.

yes I got an optimate 3 in summer hook it up and forget about it no more seats off for me http://www.ebay.co.uk/itm/Optimate-3-12V-Battery-Charger-and-conditioner-/262243455592?hash=item3d0eed9268:g:cv8AAOSwD0lUbMy5 got mine for £38

Thanks guys for the help. Battery out and on charge.
Using a Oxford Optimiser 900 (Will connect permanent lead when putting battery back)

yes Campbell a lot less hassle all round with the lead  on

Campbell59 wrote:

Thanks guys for the help. Battery out and on charge.
Using a Oxford Optimiser 900 (Will connect permanent lead when putting battery back)