Handle bar risers

Good day all,
I would appreciate the guidance from any one with the experience of changing handle bar riser on 2011 Intruder.
My machine has the standard factory item fitted. These thing seem to be an incredibly stupid price other than from Custom Cruisers at about £60.00. The set I would like will bring the handle bars back two inches. The all important question is will I have to fit longer cables? Has any one already do it?

G. Terence

G.Terence wrote:

Good day all,
 The all important question is will I have to fit longer cables? Has any one already do it?

G. Terence

Hi Terry, To answer your 'all important question' They'll be fine     I have some of the 2" spacers/risers that go under the existing risers if you'd like those? these things www.suzuki800.com/t410-2-riser-install-suzuki-c800-c50

Hello again,
I am happy with the existing riser height, all I went is to retain the height and bring the bars back two inches. Will I need longer cable in that event ?

G.Terence

No the cables will be fine in that case Terry  one thing I would check though, is there clearance for the risers hitting the chrome speedo housing on the tank when on full lock?

Hi Terry they should be fine I've got 4" risers with 2" pullback on my 2005 intruder with no issues,& the cables are long enough

simbo wrote:

G.Terence wrote:

Good day all,
 The all important question is will I have to fit longer cables? Has any one already do it?

G. Terence

Hi Terry, To answer your 'all important question' They'll be fine     I have some of the 2" spacers/risers that go under the existing risers if you'd like those? these things www.suzuki800.com/t410-2-riser-install-suzuki-c800-c50

If you still have them ill take them off your hands, shh don't tell katsd

Good evening all,
Many thanks for all that sound advice. Bringing the standard height back just two inches will hit the speedo (I hadn't thought that one out) So the tried and tested four inch height by two back will do the job with no cable changes required.
Very many thank to all.

G.Terence

hawktheslayer wrote:

simbo wrote:

G.Terence wrote:

Good day all,
 The all important question is will I have to fit longer cables? Has any one already do it?

G. Terence

Hi Terry, To answer your 'all important question' They'll be fine     I have some of the 2" spacers/risers that go under the existing risers if you'd like those? these things www.suzuki800.com/t410-2-riser-install-suzuki-c800-c50

If you still have them ill take them off your hands, shh don't tell katsd

They're your's then    I don't want no 'outdated technology' in my garage 

Thanks ill buy dinner when we arrange to meet re france