Suzuki 800 Intruder Club & Forum A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder |
| | Fitting Highway Hawk short pipes on Suzuki M800 | |
| | Author | Message |
---|
Guest Guest
| Subject: Fitting Highway Hawk short pipes on Suzuki M800 Wed Nov 30, 2011 6:26 pm | |
| Many Thanks Jez A message sent to me by (Dozers Dad) Hi Peter, My HH Shortcuts didn't come with any instructions. It's not rocket sience but once you've got the original system off gimme a call if you get stuck mate....... Regards Jez (aka Dozers Dad) PS.... A top tip to get you started is that once the original system is off. You need to remove the large triangular bracket that it attached to at the back of the bike and the plastic frame cover just in front of it. That is where the new bracket fits. Very loosely fit the two pipes together before you offer them up to the cylinderhead. The rest should become apparent as you go along but if not gimme a bell. PPS.... If you've got a hex bit for a socket set or an impact drive bit. Use the bit and a 6mm ring spanner to tighten the lower bolt on the front cylinder. Getting at it with an Allen key is mission "almost" impossible! :shock: Many thanks again D/D a great help |
| | | | Fitting Highway Hawk short pipes on Suzuki M800 | |
|
Similar topics | |
|
| Permissions in this forum: | You cannot reply to topics in this forum
| |
| |
| |
Slide Show | A random selection of suzuki800.com member bikes. |
Latest topics | » Hello All, by Badger Yesterday at 10:56 pm
» G’day by Badger Yesterday at 2:37 pm
» Hi all by Badger Yesterday at 2:33 pm
» just saying hello to this site by sgtruth60@gmail.com Tue May 07, 2024 8:04 pm
» Newbie by M800chimp Tue May 07, 2024 11:28 am
» 12inch apes by Mbroom21 Tue Apr 16, 2024 12:54 pm
» Aye what's happenin'? by 717RedRumBob Fri Apr 12, 2024 6:50 am
» Handle bars rotation for comfort by Badger Thu Apr 11, 2024 1:20 pm
» Hello! by GregWidger Mon Apr 01, 2024 9:16 pm
» Hey to all by alongfortheride Tue Mar 26, 2024 9:41 pm
» Just saying hello as asked... plus a question. by SAM11206 Wed Mar 20, 2024 6:34 pm
» Hello! by Onigatudor Wed Mar 20, 2024 2:39 pm
» Choke plunger by flying1 Wed Mar 13, 2024 4:43 pm
» Hello intruder people by nano Tue Mar 05, 2024 2:19 pm
» Hi from North east England by Brianhuck Sat Mar 02, 2024 7:30 pm
» VX800 - Wiring issue colours & diagram? by Billybop90 Fri Mar 01, 2024 12:44 am
» Looking for a set of Leg wind deflectors for a C50 Boulivard. by Aikido789 Sat Feb 24, 2024 10:11 am
» Saying hello from Cheshire by bernard chaddock Wed Feb 21, 2024 4:58 pm
» ola de portugal by fabio almeida Tue Feb 20, 2024 9:28 am
» Hello from Texas by icoolwecool99@gmail.com Mon Feb 19, 2024 9:47 pm
|
|