Suzuki 800 Intruder Club & Forum
Welcome to suzuki800 Intruder forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, VZ800, VS800, C50, M50, Intruder / Boulevard / Marauder.

You will need to register before all the area's become visible, before doing so please enter & read the first thread in the Introductory area

It will only take a minute to register & it would be great to have you on board
This is a free to access and use site.
Suzuki 800 Intruder Club & Forum
Welcome to suzuki800 Intruder forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, VZ800, VS800, C50, M50, Intruder / Boulevard / Marauder.

You will need to register before all the area's become visible, before doing so please enter & read the first thread in the Introductory area

It will only take a minute to register & it would be great to have you on board
This is a free to access and use site.
Suzuki 800 Intruder Club & Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Suzuki 800 Intruder Club & Forum

A UK Site Dedicated To The Suzuki C800, VL800, VX800, M800, VZ800, VS800, C50, M50 Model Intruder / Boulevard / Marauder
 
HomeLatest imagesRegisterLog in

 

 Innovv K2 cameras fitted to C800

Go down 
2 posters
AuthorMessage
KeithW
Member
KeithW



Innovv K2 cameras fitted to C800 Empty
PostSubject: Innovv K2 cameras fitted to C800   Innovv K2 cameras fitted to C800 Icon_minitimeTue Nov 06, 2018 4:43 pm

Hi All
It's only taken 18 months but I have finally fitted a pair of cameras to the bike. In the end I opted for the Innovv K2 cameras. It's a brand new design so I was/am expecting teething troubles but they are well made and presented with a good specification. Available from September 2018, I pre ordered mine in August and they arrived in early September.

They are now fitted and had their first serious run out to a rally on 20th September. I've never had anything to do with dash cams before so the whole experience is new to me.  First issue was positioning the front camera. Initially I put it on the front crashbar but I got some very good footage of the front wheel going round! I moved it higher, just under the screen,but the mounting was all wrong - vibrated like hell - so it is now mounted just under the screen but bolted to the headlight mounting bolt. I had to make a quite substantial bracket to stop the vibration. The video is now quite good and I am pleased with it.

Next up is a problem with battery drain - it draws 40ma with the ignition off. Because they want instant gps and a method of powering up when the bike is parked (works off the G sensor) the power unit goes directly to the battery. Not an option to leave it like that so I've wired it to the PDM60 accessory fuse panel. It means I forgo the "park mode" but I probably wouldn't have used that anyway.

There is a G sensor that 'senses' when you have a bit of a mishap and saves the files. I have heard of this in the dashcam world, and it sounds nice, but it just isn't practical. Over half the files were being 'locked' because the sensor thinks every little bump is an 'accident, even with the sensor is at it's lowest sensitivity setting. So I've disabled the sensor! I now have a 128gb sd card fitted and, with 2 cameras, gives 10 hours of full HD video. If I want to keep some files, for whatever reason, I will swap the SD card for a 68gb card I now carry as a spare! Talking to my son-in-law, who drives a taxi, it is the same with cars and he always carries a spare card for that reason.

The designer/manufacturer is aware of these issues, plus some others, as he has a forum set up for reporting. Little things that crop up from mass usage are usually catered for with a firmware update in 2 or 3 weeks. Some people seem to be a bit impatient with it but I like the setup.

I've got a walk round video of the fitting but I can't seem to put it on here - it says it is too big. And I don't know how to put it on you tube either! The size is 279MB. Any help on that score would be nice.

KeithW
Back to top Go down
peardrop3
Very Valued VIP Member
peardrop3



Innovv K2 cameras fitted to C800 Empty
PostSubject: Re: Innovv K2 cameras fitted to C800   Innovv K2 cameras fitted to C800 Icon_minitimeWed Nov 07, 2018 2:04 pm

Sounds like a good mod Keith. Keep us updated ok?
Back to top Go down
 
Innovv K2 cameras fitted to C800
Back to top 
Page 1 of 1
 Similar topics
-
» Red LED's Fitted .....Bit of Bling..... Suzuki Volusia C800
» Indicator Warning Buzzer fitted to C800
» Vance & Hines Pro Pipes Fitted to C800
» Drag Bars Fitted To Suzuki C800 / C50
» Custom Replacement Speedo Face Fitted ...... 2010 Suzuki C800

Permissions in this forum:You cannot reply to topics in this forum
Suzuki 800 Intruder Club & Forum :: The Garage :: General Aftermarkets & Modifications-
Jump to:  
Slide Show
A random selection of suzuki800.com member bikes.
Latest topics
» just saying hello to this site
Innovv K2 cameras fitted to C800 Icon_minitimeby sgtruth60@gmail.com Tue May 07, 2024 8:04 pm

» Newbie
Innovv K2 cameras fitted to C800 Icon_minitimeby M800chimp Tue May 07, 2024 11:28 am

» G’day
Innovv K2 cameras fitted to C800 Icon_minitimeby Milosdevino Sat May 04, 2024 5:39 am

» 12inch apes
Innovv K2 cameras fitted to C800 Icon_minitimeby Mbroom21 Tue Apr 16, 2024 12:54 pm

» Aye what's happenin'?
Innovv K2 cameras fitted to C800 Icon_minitimeby 717RedRumBob Fri Apr 12, 2024 6:50 am

» Handle bars rotation for comfort
Innovv K2 cameras fitted to C800 Icon_minitimeby Badger Thu Apr 11, 2024 1:20 pm

» Hello!
Innovv K2 cameras fitted to C800 Icon_minitimeby GregWidger Mon Apr 01, 2024 9:16 pm

» Hey to all
Innovv K2 cameras fitted to C800 Icon_minitimeby alongfortheride Tue Mar 26, 2024 9:41 pm

» Just saying hello as asked... plus a question.
Innovv K2 cameras fitted to C800 Icon_minitimeby SAM11206 Wed Mar 20, 2024 6:34 pm

» Hello!
Innovv K2 cameras fitted to C800 Icon_minitimeby Onigatudor Wed Mar 20, 2024 2:39 pm

» Choke plunger
Innovv K2 cameras fitted to C800 Icon_minitimeby flying1 Wed Mar 13, 2024 4:43 pm

» Hello intruder people
Innovv K2 cameras fitted to C800 Icon_minitimeby nano Tue Mar 05, 2024 2:19 pm

» Hi from North east England
Innovv K2 cameras fitted to C800 Icon_minitimeby Brianhuck Sat Mar 02, 2024 7:30 pm

» VX800 - Wiring issue colours & diagram?
Innovv K2 cameras fitted to C800 Icon_minitimeby Billybop90 Fri Mar 01, 2024 12:44 am

» Looking for a set of Leg wind deflectors for a C50 Boulivard.
Innovv K2 cameras fitted to C800 Icon_minitimeby Aikido789 Sat Feb 24, 2024 10:11 am

» Saying hello from Cheshire
Innovv K2 cameras fitted to C800 Icon_minitimeby bernard chaddock Wed Feb 21, 2024 4:58 pm

» ola de portugal
Innovv K2 cameras fitted to C800 Icon_minitimeby fabio almeida Tue Feb 20, 2024 9:28 am

» Hello from Texas
Innovv K2 cameras fitted to C800 Icon_minitimeby icoolwecool99@gmail.com Mon Feb 19, 2024 9:47 pm

» VX800 vacuum hose(s) 1996
Innovv K2 cameras fitted to C800 Icon_minitimeby Billybop90 Fri Feb 16, 2024 7:16 pm

» Chrome Fender Tips - Volusia VL800, Boulevard C50T
Innovv K2 cameras fitted to C800 Icon_minitimeby SWEET Fri Feb 16, 2024 6:25 pm

Log in
Username:
Password:
Log in automatically: 
:: I forgot my password